6ES7138-4HA00-0AB0 Siemens SIMATIC DP, DP MASTER INTERFACE FOR IM 151-7 CPU OR IM 151-8 PN/DP (ET200S)

Specification Sheet for 6ES7138-4HA00-0AB0 Siemens SIMATIC DP, DP Master Interface Module for IM 151-7 CPU or IM 151-8 PN/DP (ET200S), featuring PROFIBUS DP Interface (9-Pin Sub-D, Female) as DP Master

Product Overview

• Brand: Siemens

• Model Number: 6ES7138-4HA00-0AB0

• Series: SIMATIC DP, ET200

• Origin: Germany

Functionality & Applications

• Function: Acts as a DP Master interface module for IM 151-7 CPU or IM 151-8 PN/DP (ET200S) systems, enabling communication and control via the PROFIBUS-DP interface.

• Applications: Ideal for industrial automation systems requiring efficient data transmission and reliable communication, such as steel mill water treatment plants, automated production lines, and other industrial processes.

Technical Specifications

• Form Factor: Modular

• Mounting: Field mountable

• PLC Type: Hard PLC

• I/O Points: N/A (This module is an interface module and does not directly involve I/O points)

• Operating Voltage: Typically 24V DC (may vary depending on specific application and system configuration)

• Processing Speed: N/A (Interface module, speed depends on connected CPU)

• Program Memory: N/A (Related to CPU, not interface module)

• Data Memory: N/A (Related to CPU, not interface module)

• Certifications: CE

• Operating Temperature: Typically -25°C to +70°C (may vary depending on product version and environment)

• Humidity: 5% to 95% RH (non-condensing)

• Weight: Approximately 0.42 to 0.5 kg (may vary slightly)

• Dimensions: 10.20 x 10.90 x 8.60 cm (or similar, refer to physical unit for exact dimensions)

Interface & Communication

• Interface Type: PROFIBUS-DP Interface (9-pin Sub-D female connector)

• Communication Protocol: PROFIBUS DP

• Communication Rate: Integrated 12 Mbit/s PROFIBUS DP master interface

• Features: Supports parallel operation of two PROFIBUS DP interfaces on the IM 151-7 (F-) CPU module, enhancing system utilization of equipment and machinery.

Programming & Configuration

• Programming Software: STEP 7, version 5.2 or higher with SP1 or later

• Configuration: Configured and programmed via STEP 7 software to set up the DP master and communication settings.

Miscellaneous

• Customization: Not customizable (standard product)

• Warranty: Typically 1-year warranty, subject to the seller's policy (check with seller for exact details)

Note: The above specifications are based on general information and may vary depending on product version, production batch, and actual application environment. For accurate and up-to-date information, please refer to the product manual, technical documentation, or contact Siemens technical support.