Siemens SIMATIC S7-300, CPU 317T-2 DP 6ES7317-6TJ10-0AB0

Specification Sheet for Siemens SIMATIC S7-300, CPU 317T-2 DP (6ES7317-6TJ10-0AB0)

Basic Information

• Product Model: 6ES7317-6TJ10-0AB0

• Product Series: SIMATIC S7-300

• CPU Type: CPU 317T-2 DP

• Application Areas: Chemical, Electronics, Electrical, and other complex industrial automation fields requiring high processing power and extensive communication capabilities

Hardware Characteristics

• Integrated Interfaces:

1. MPI/DP Interface: 12 Mbit/s for MPI (Multi-Point Interface) and PROFIBUS DP communication

2. DP (Drive) Interface: Dedicated high-speed interface for PROFIBUS DP communication, suitable for connecting drives and other devices

• Power Supply: Typically requires 24 V DC power input, with compatibility for a range of voltages (consult datasheet for exact range)

• Power Protection: External protection is recommended for power supply cables

• Integrated I/O: Front connector with 1 x 40-pin for direct connection of technology modules

• Memory Card: Micro Memory Card required, minimum 4 MB capacity for operation

Memory Configuration

• Working Memory: 512 KByte, providing ample space for program execution and data manipulation

• Load Memory: Capacity depends on the Micro Memory Card used (minimum 4 MB required, additional capacity for storing larger programs and data)

• Retentive Memory: Available for storing data blocks that need to retain their values even after power loss

Programming Environment

• Supported Software: STEP 7 V5.x or higher, ensuring compatibility with the latest Siemens programming tools

Processing Capabilities

• Enhanced processing power suitable for complex control tasks and high-speed data processing

• Operation times for various arithmetic and logical operations will vary but are optimized for industrial automation applications

Additional Features

• Program Block Quantities:

• Maximum number of Data Blocks (DBs): High capacity, supporting large numbers of data blocks (consult datasheet for exact limit)

• Maximum number of Function Blocks (FBs) and Functions (FCs): Supports a large number of reusable program blocks, allowing for modular programming

• Types and quantities of Organization Blocks (OBs): Includes standard OBs such as OB1 (main program loop), OB10-OB122 for specific events and interrupts, among others

• Counters and Timers:

• S7 Counters: Unlimited (limited only by memory capacity), with retentivity for maintaining counter values across power cycles

• S7 Timers: Unlimited (limited only by memory capacity), with retentivity for maintaining timer settings across power cycles

Notes

• The above specification sheet is based on publicly available information and may be subject to change due to product updates.

• It is strongly recommended to consult the latest official documentation or contact Siemens technical support for the most accurate and up-to-date information before purchase or use.

• The specified performance characteristics and capabilities are typical values and may vary depending on individual system configuration and operating conditions.