Siemens SIMATIC S7-400, CPU414F-3 PN/DP 6ES7414-3FM06-0AB0

Specification Sheet for Siemens SIMATIC S7-400, CPU 414F-3 PN/DP, Model 6ES7414-3FM06-0AB0

Basic Information

• Product Model: 6ES7414-3FM06-0AB0

• Product Series: SIMATIC S7-400

• CPU Type: CPU 414F-3 PN/DP

• Application Areas: Heavy industry, process automation, manufacturing, and other complex industrial automation fields requiring high-speed communication and processing capabilities

Hardware Characteristics

• Integrated Interfaces:

• 1st Interface: MPI/DP at 12 Mbit/s (connector X1), supporting both MPI and PROFIBUS DP communication

• 2nd Interface: Ethernet/PROFINET (connector X5), enabling high-speed network communication for data exchange, remote access, and diagnostics

• 3rd Interface: IF 964-DP plug-in (IF1), a modular interface that can be used for additional communication or I/O modules (depending on specific plug-in installed)

• Power Supply: External, typically 24 V DC (specific voltage range may vary)

• Power Protection: External protection recommended (for power supply cables and system components)

Memory Configuration

• Work Memory: 4 MB, divided into 2 MB for code and 2 MB for data

• Load Memory: Typically uses flash memory, size and type may vary depending on configuration and upgrades

• Retentive Memory: Available for retentive data blocks, size and configuration may be managed through programming

Programming Environment

• Supported Software: STEP 7 V5.x and higher (specific version may depend on firmware and feature set), often used in conjunction with TIA Portal for modern projects

Processing Capabilities

• High-performance CPU with advanced processing capabilities suitable for complex automation tasks and high-speed communication requirements

• Processor speed and detailed timing specifications may vary, consult latest datasheets for exact figures

Additional Features

• Program Block Quantities:

• Maximum number of Data Blocks (DBs): High capacity, limited only by available memory

• Maximum number of Function Blocks (FBs) and Functions (FCs): High capacity, limited only by available memory and programming requirements

• Types and quantities of Organization Blocks (OBs): Comprehensive set including OB1 (main program), OB10-OB100 (cyclic interrupts), OB80-OB87 (error handling), and others

• Communication Capabilities: Supports MPI, PROFIBUS DP, Ethernet/PROFINET, and potentially other protocols depending on optional modules and upgrades

• Counters and Timers:

• S7 Counters: Unlimited (limited only by RAM capacity), with retentivity

• S7 Timers: Unlimited (limited only by RAM capacity), with retentivity

Notes

• The above specification sheet is based on publicly available information and may be subject to change due to product updates.

• It is highly recommended to consult the latest official documentation or contact Siemens technical support for the most accurate information before purchase or use.

• The product features may include additional options and configurations not explicitly mentioned here, consult the product catalog for detailed specifications.